Top 10 Reasons - LiteFoot ATV Rubber Track Conversion Systems

Top 10 Reasons for Selecting LiteFoot “The Original
All Terrain” ATV Rubber Track Conversion System!

When you are looking at purchasing an ATV track conversion system, here are 10 great reasons for making your choice LiteFoot.

10. Great Warranty
Full One Year Limited Warranty.

9. Full Range of Operating Speeds
Maximum speed on LiteFoot tracks depends on the maximum speed of your ATV on original tires. LiteFoot ATV tracks are engineered to operate using a natural gear reduction which typically lowers the top end speed of your ATV by about 30%. LiteFoot tracks are capable of traveling at speeds within your ATV original manufacturers factory specifications and top speed is only limited by the size of your ATV. Low range operation allows you to convert maximum low end torque, allowing you to power through the toughest terrain.

LiteFoot recommends that you operate your ATV at speeds that are appropriate for the riding conditions and not beyond the abilities of the driver or the ATVs capabilities.

8. Added Ground Clearance and Stability
Typically LiteFoot tracks add 4-6 inches of extra ground clearance depending on the diameter of your original tire. Ground to the center of your wheel hub with LiteFoot is a between 15 and 17 inches, depending on tread pattern and suspension set-up. LiteFoot tracks widens your ATVs stance and lengthens the footprint contact from front to rear. Since most of the weight of the tracks system is below the center of the drive axle, LiteFoot provides incredible stability compared to tires!

7. Strong Component Material in the Frame, Sprocket, Axles, Wheels and Internal Suspension
The LiteFoot track system frame, drive sprocket and some additional components are made of solid cast aluminum, the surfaces won’t rust and you won’t see any paint chips. Wheels are made from a composite material and keyed to a steel axles which run on triple sealed bearings through a sealed steel axle housing. Lubrication points on the suspension are easily accessed for greasing with the supplied grease gun.

6. Up to 3500 Pounds Gross Vehicle Weight Rating [GVWR]
The standard LiteFoot track system is rated for 2500 lb. gross vehicle weight, The Utility-Rated model offers a 3,500 lb. GVWR. The gross vehicle weight rating includes; the ATV weight without wheels, operator and total cargo weight. In general, with the 3500 lb. GVWR, the LiteFoot UR covers most utility ATVs on the market today. For non-utility 4x4 ATVs, when fully equipped and loaded within the ATVs original manufacturers vehicle weight ratings, including an operator, the standard model LiteFoot stays well within the 2,500 lb. GVWR.

5. Three Track Tread Options [5 Models]
With the introduction of the LiteFoot M3 Model, added to the LiteFoot XT and original tread, Mattracks now offers three track tread choices; the original [5/8” lug], [1” lug] XT tread and the new M3 track [1 3/4” paddle lug]. All three systems are designed to operate in all types of terrain and all weather conditions and do not have any holes through the track. The one piece tracks have internal belting, composite reinforcement, and specially formulated rubber compound to achieve track efficiencies over a wide temperature range.

4. Adjustable Internal Suspension
[adjustable ride and surface contact]
The exclusive LiteFoot SCS system, an internal shape changing suspension, offers a lot more then just a smoother ride. The SCS System which is the only adjustable suspension of its kind offers these advantages:

rider can adjust the size of the track contact area to better match riding conditions;

larger footprint for more flotation in soft terrain and more tread in contact with the ground.
smaller footprint for increased pre-load on the suspension for smoother riding in rough terrain and easier steering.
change approach and departure angles improving the ability to climb objects and better performance in hilly terrain.

the SCS System works with the suspension on the ATV to absorbs ground shocks and vibration, reduces driver and machine fatigue.
Patented rubber torsion anti-torque system supplies a pre load to the track unit, limiting the track over rotation.

3. You Can Travel Year Round on All Terrain Types
LiteFoot tracks are designed to allow you to travel over all terrain types including; mud, sand, rocks, marsh, snow, hard surfaces and logs

2. You Get a Lot for Your Money?
With LiteFoot you get:

tracks that come fully assembled, including all necessary mounting brackets for your ATV.
a system that is about as easy to install as changing tires!
a system that is durable enough to operate in all climates, terrain, seasons and withstand the harshest conditions.
two track tread choices and optional camouflage patterning on the major internal aluminum components.
a system that was engineered and designed by Mattracks, Inc. the company that created the track conversion market. With sales in over 45 international markets and models for ATVs, SUVs, 4X4 tractors up to 100 HP, and trucks including systems with a gross vehicle weight rating up to 20,000 pounds.

1. The Number ONE Reason is You!
You deserve the best ATV track conversion system on the market, don’t settle for less.

“The original 4 season all-terrain ATV rubber track conversion system”

[Online Store] [Lastest News] [www.mattracks.com]

Mattracks supports responsible use and operation of All-Terrain Vehicles. We recommend you follow your ATV Manufacturers operational instructions. Use proper safety equipment including a helmet and respect private property and the environment while operating your ATV.

[Home] [Selecting the Right Tracks] [Product Features] [Key Features] [SCS Suspension] [Frequent Questions] [Top 10 Reasons] [Galleries Video] [Company Information] [Contact Us]